Many sex doll owners have faced this problem —
after some time, the doll’s breasts stop looking as perky or feeling as soft as before. The once bouncy, gel-filled breasts might appear slightly deflated, uneven, or even a bit hard — like they’ve lost air.

But don’t worry — this isn’t a serious issue.
Most of the time, dents or deformations happen because the doll has been stored under pressure, kept in the same position for a long time, or cleaned with uneven force. High temperature and humidity can also cause the internal gel to deform.

The good news is — with the right tools and a bit of patience, you can easily fix it yourself at home and restore your doll’s natural fullness and softness.

How to Tell If Your Doll’s Breasts Need Repair

Whether your doll has standard breasts or is a huge breasts sex doll, these are the common signs of deformation:

• The breasts look uneven — one side higher than the other.

• A hollow feeling when pressed; slow rebound.

• Texture changed from soft to stiff.

• Surface looks dull or less lifelike.

These symptoms usually mean the internal gel layer has shifted or collapsed. The sooner you fix it, the better the result.

Common Causes of Dented Gel Breasts

1. Long-term storage or pressure
If your doll lies flat for a long time or has heavy objects pressing on her chest, the internal gel loses support and gradually deforms.

2. Excessive squeezing or improper cleaning
Strong pressure or rough handling during cleaning can push the gel aside, creating dents.

3. Environmental factors
High temperature, humidity, or direct sunlight accelerate gel aging, reducing elasticity.

4. Manufacturing differences
Different brands and production batches may use different gel densities. Softer gels are more prone to deformation.

Preparation Before Repair

Don’t worry — you only need a few basic tools, easily available online or in craft stores.

You’ll need:

• Breast dent repair AB gel (two-part gel mixture)

• Syringe and needle

• Small cup or container (for mixing)

• Disposable gloves

• Clean towel and alcohol wipes

Environment setup:

• Keep the area clean and dust-free.

• Maintain a comfortable temperature (20–25°C).

• Lay a soft towel on the table to avoid skin scratches.

Step-by-Step Repair Guide

It’s actually quite simple — no professional skills required. Just follow these steps patiently, and your big boobs sex doll will soon look as good as new.

1. Identify the dent
Gently press and locate the deformed area. Use side lighting to better see uneven spots.

2. Create space between the skin and gel
Insert the needle gently (preferably from the nipple or under-breast area) to slightly lift the outer layer. This ensures the repair gel spreads evenly later.

3. Mix the repair gel
Mix Part A and Part B of the repair gel in a 1:1 ratio and stir quickly.
⚠️ Note: The gel starts to cure within 5–10 minutes, so work efficiently.

4. Inject the gel
Draw the mixed gel into the syringe and slowly inject it into the hollow area. Tap lightly as you go to help the gel spread naturally and avoid air bubbles.

5. Shape and fix
After injection, gently adjust the shape with your hands to achieve a natural, full curve. Lay the doll flat and let it rest for at least 12 hours for the gel to cure completely.

Aftercare Tips

Once repaired, don’t rush to touch or dress your doll. The gel needs time to fully set. Let her rest for 12–24 hours.

When fully hardened, apply a little talcum powder to restore the silky touch. Check the symmetry — if one side looks slightly off, you can gently knead it into place.

Avoid placing her face down or applying pressure on the chest during this period. Ideally, let her lie flat or slightly on her side so the gel stabilizes naturally.

Daily Maintenance: Keep the Curves Lasting Longer

Repairing once doesn’t mean it’ll stay perfect forever — good care makes all the difference.

If your doll is a huge breasts sex doll, her chest is heavier, so extra attention to support and posture is essential.

FAQs

Q1: The breasts are still uneven after repair — what should I do?
A: Gently press to redistribute the gel; if the difference is large, adjust again before it fully hardens.

Q2: Can I use regular silicone instead of the repair gel?
A: Not recommended. Regular silicone is too hard and will make the breasts feel unnatural.

Q3: What if I inject too much gel?
A: Before it solidifies, you can use the syringe to extract some of it and reshape.

Q4: The repair gel has a strong smell?
A: Make sure the area is well-ventilated. The odor will disappear completely after curing.

Q5: How long will the repair last?
A: With proper care and storage, the restored shape usually lasts 6–12 months or longer.

Before & After Comparison

Final Thoughts

Repairing a dented gel breast isn’t as complicated as it seems.
With the right materials and a bit of patience, you can easily restore your doll’s original look and feel.

The process is simple: find the dent → inject repair gel → let it cure → reshape gently.

However, what really matters is the daily care afterward. Don’t let her chest get compressed for long periods, keep her in a dry place, and give her supportive lingerie.

With a little attention, your sex doll can regain that soft, full, lifelike charm — just like the day you first unboxed her, making you fall in love with her all over again.